Types Of Airplane Engines

WELCOME

All the calculations show it can't work. There's only one thing to do: make it work.
— Pierre Georges Latécoère, early French aviation entrepreneur.


 The different types of airplane engines can be divided into three categories. Aircraft designers keep looking for ways to make planes go higher and faster on less fuel.

Airplane Engine Background
Ever since Wilber and Orville flew over the sands of North Carolina, aircraft designers have been trying different types of airplane engines. The purpose of airplane engines is to provide thrust to push an aircraft through the air and overcome the force of drag. Designers are concerned with the amount of power or thrust produced, the weight of the engines, fuel consumption and cost. The different types of aircraft engines have evolved into three main categories.
Piston Engines
The first airplane engines were of the piston or reciprocating type and this type of engine is still in use today. Piston engines were the only type of aircraft engine until 1939 when the first turbine powered aircraft flew. Piston aircraft engines reached their zenith during World War II. Aircraft developed for the war added superchargers and were able to fly higher and faster than any planes in history.

Reciprocating aircraft engines can be either water-cooled or air-cooled. Liquid cooled engines can be built in any configuration such as in-line cylinders, V configurations or flat opposing cylinders. Historically, air cooled engines were in a radial configuration so all of the cylinders can cool equally. Modern, general aviation engines are usually air-cooled in a horizontally opposed cylinder configuration.

The use of piston engines in modern aircraft is mostly limited to private single and twin engine aircraft. Piston engines in private aircraft are efficient and less expensive to maintain and buy. The technology in these engines keeps improving to allow the use of alternate fuels and adding advanced electronic engine management.

Jet Airplane Engines
Turbofan Jet Engine
The use of jet engines in aircraft became widespread in the 1950's and now almost all commercial and military aircraft types are powered by jet engines. Jet engines are turbine engines and allow airplanes to fly higher and faster. Here is an article on some of the fastest jet airplanes.

The basic jet engine has a front compressor section that compresses cold air. The compressed air then passes into a combustion chamber where fuel is added and ignited. The expanding gases from the burning fuel turns the turbine which is connected to the compressor. Thrust is produced as the hot expanding gases push out of the rear of the jet engine.

A modern jet engine also has a fan section in front of the compressor that pulls more cold air into the compressor, then through combustion and the turbine. The fan is typically larger in diameter than the compressor/turbine section of the engine. The fan also pushes cold air around the hot section of the engine, providing additional thrust. Turbo fan engines have large diameter fan sections compared to the diameter of the hot section. Turbo fan engines are more fuel efficient than the older turbojet engines.

Turboprop Aircraft Engines
US Coast Guard C-130


Turboprop engines are aircraft engines with a turbine hot section turning a propeller or rotor. The guts of a turboprop are the same as a jet engine. Turboprop engines allow are used in aircraft similar to those using piston engines, just a few noches bigger and faster. Turboprop engines are used in single, twin and even four engine aircraft like the C-130 Hercules.

The main advantage of turboprop power over piston is the high power to weight ratio. Turboprops allow airplanes to cruise at 350 to 400 mph, faster than most piston powered planes, but slower than jets. Turboprops can generate power or thrust very quickly, making them the choice for airplanes that need to be able to take off from a short runway. Turboprops are also less susceptible to foreign object damage than their vacuum cleaner like turbofan cousins.

Turboprop engines are also widely used to power helicopters. The speed of the turbine is geared down to turn the helicopter rotor. Helicoptors are an excellent example of the high power to weight potential of turboprop engines.

Resources
Aerospace Web: Jet Engine Types: http://www.aerospaceweb.org/question/propulsion/q0033.shtml

U.S. Centennial Commission of Flight: http://www.centennialofflight.gov/essay/Evolution_of_Technology/piston_engines/Tech23.htm

Pilot Outlook: Turboprop Engines: http://www.pilotoutlook.com/airplane_flying/turboprop_engines

Photo Credits:

C-130: US Coast Guard Press



Jet Engine: NASA UEET

Comments

Post a Comment

Popular posts from this blog

Top 10 Best Aeronautical Engineering Colleges in The World - 2018

Image
Aeronautical engineering involves the study of aircrafts and spacecraft’s. This course prepares the Top 10 Richest students to design and engineer flight-capable.    This course has a vast scope for employment. Many universities have included this course in their schools to equip the enrolling students with sufficient knowledge and prepare them to serve the field of science. This course is the passport to the future because of the various developments happening in this space and in aerodynamic research. Here is the list of top universities which have successfully made use of the room available for developed to offer quality education. Students from all over the world are competing to get an admission in these universities. They are becoming their better selves every day to become worthy of selection by these universities. Students aspiring to become a good aeronautical engineer will have these universities set as their goals and in their wish list. Below are the Top 1
Read more

Empennage

Image
Empennage     The empennage, commonly called the tail assembly (see figure 1-7), is the rear section of the body of the airplane. Its main purpose is to give stability to the aircraft.  The fixed parts are the horizontal stabilizer and the vertical stabilizer or fin. The front, fixed section is called the  horizontal stabilizer  and is used to p revent the airplane from pitching up or down .   The rear section is called the  elevator  and is usually hinged to the horizontal stabilizer. The elevator is a movable airfoil that  controls the up-and-down motion of the aircraft's nose.    The vertical tail structure is divided into the  vertical stabilizer and the rudder . The front section is called the  vertical stabilizer and is used to prevent the aircraft from yawing back and forth .  The principle behind its operation is much like the principle of a deep keel on a sailboat. In light, single-engine aircraft, it also serves to offset the tendency of the air
Read more

Clean Country Swiss Now Plan to Clean the Junk in The Space. Amazing

Image
A Switzerland-based spaceflight company is finalizing plans with Canada over a potential launch site for a new private space plane, which is slated to launch a satellite to clean up space junk by 2018. The company, Swiss Space Systems (S3), plans to launch the new Clean Space One satellite using the European Suborbital Reusable Shuttle, a small space plane the firm is developing for low-cost launches off the back of a modified Airbus A300 jumbo jet. CleanSpace One is a 66-pound (30 kilograms) technology demonstration spacecraft designed to link up with Switzerland's out-of-commission SwissCube nanosatellite — a small cube that measures 3.93 inches (10 centimeters) on each side — and safely de-orbit the target craft. The mission aims to demonstrate orbital identification and rendezvous with an uncooperative target and has an estimated cost of about 15 million Swiss Francs ($16 million). CleanSpace One is chasing its target, one of the CubeSats launched by Swit
Read more